Value stream mapping approach and analytical network process to identify and prioritize production system’s Mudas (case study: natural fibre clothing manufacturing company)

The current research has been done to identify and prioritize the Mudas of the production line of a natural fibre clothing manufacturing company; in this way, value stream mapping has been used to identify the Mudas, then analytical hierarchy method has been used to screen the Mudas. In the first step, necessary information to design value stream of production process has been obtained by observation, measurement and interview; afterward, according to the obtained information and by forming a focus group, Mudas in the production line have been identified and prioritized according to seven categories of Mudas. In order to prioritizing the Mudas by the usage of analytical hierarchy method, the Super Decision software has been applied. Then, according to the obtained priorities, suggested map of the future value system has been drawn and some suggestions have been presented to eliminate Mudas and move towards the lean manufacturing.     

Patient involvement in Danish hospital design

This paper examines patient-involvement in the process used to design new hospitals. Denmark is in the midst of a phase of hospital building. This recent experience is studied by means of expert interviews with senior practitioners involved in three projects. Examined thematically, the data covers the structure of the design process, identification and ranking of stakeholders, the methods of user-involvement and approaches to accessibility. The paper adds new insight on an under-studied area, design for hospitals and makes recommendations for a change of approach to user-participation in their design. It highlights the difficulties in applying the methods of user-centred design and Design for All in large projects.     

Optimal inspection for randomly triggered hidden deterioration processes

This paper deals with degradation processes whose onset is triggered at a random time and which stay hidden until they are discovered through inspection or when they begin to show symptoms. This is applicable in many healthcare and industrial scenarios, for example, in the modeling of breast cancer or termite infestation. In our model, we assume that symptoms appear after hitting a random critical threshold and that inspections may have a sensitivity less than one as well as a nonzero false positive rate. The expected cost of repair is derived, and the inspection rate is optimized for a cycle (which lasts from degradation-free to repaired state). This gives results for three cases: the first is for a finite observation period with no degradation recurrence, the second for infinite time horizon allowing recurrence. In the third case, we derive an upper bound for the expected cost in a given constant time period. Finally, the model is applied to determine the optimal strategy for breast cancer screening with regard to the effects of different parametrizations.     

基于危险源的水利工程施工全过程安全管理研究

水利工程的特殊性,决定了其在安全管理构建中更加注重全过程管理机制的构建,以及危险源下的精准安全管控。在传统安全管理模式之下,水利工程安全管理盲点多、效率低,不利于全过程安全管理的高效实施。文章立足水利工程的危险辨识,分析了水利工程危险源全过程安全管理中的问题,并在此基础之上,从强化危险源精准辨识、构建危险源动态管理机制、优化危险源评价工作、加快危险源信息库建设等方面,具体论述了危险源下水利工程全过程安全管理措施。     

超高强7055铝合金铸锭均匀化工艺优化

采用光学显微镜、扫描电镜、差热分析及透射电镜等手段,对一种航空用超高强7055铝合金大尺寸铸锭的均匀化工艺进行分析与优化。提出分级提高均匀化温度的方法,在确保不发生过烧的情况下,最大限度改善铸锭质量。结果显示:低温预均匀化时,铸锭中析出大量的Al₃Zr相,能够大幅度降低对后续挤压变形的再结晶比例;对铸锭采用400 ℃×4 h+465 ℃×16 h+474 ℃×8 h的分级均匀化处理工艺,能够显著消除铸锭中低熔点相的含量,提高铸锭质量,同时相比于原工艺节省约13 h。新的均匀化处理工艺,不仅提高了生产效率,还能够为后续工艺提供良好的铸锭。     

Emissions of VOCs,SVOCs, and mold during the construction process: Contribution to indoor air quality and future occupants’ exposure

Building materials and human activities are important sources of contamination indoors, but little information is available regarding contamination during construction process which could persist during the whole life of buildings. In this study, six construction stages on two construction sites were investigated regarding the emissions of 43 volatile organic compounds (VOCs), 46 semi-volatile organic compounds (SVOCs), and the presence of 4 genera of mold. Results show that the future indoor air quality does not only depend on the emissions of each building product but that it is also closely related to the whole implementation process. Mold spore measurements can reach 1400 CFU/m³, which is particularly high compared with the concentrations usually measured in indoor environments. Relatively low concentrations of VOCs were observed, in relation to the use of low emissive materials. Among SVOCs analyzed, some phthalates, permethrin, and hydrocarbons were found in significant concentrations upon the delivery of building as well as triclosan, suspected to be endocrine disruptor, and yet prohibited in the treatment of materials and construction since 2014. As some regulations exist for VOC emissions, it is necessary to implement them for SVOCs due to their toxicity.     

军工船舶发电机用特种漆包线的研制

为提升漆包线产品的技术水平与行业市场竞争力,使产品进入漆包线产品的高端市场,扩大公司漆包线新品种与技术储备,提升公司科研创新和新产品的研发能力,与客户合作开展对军工船舶发电机用特种漆包线的研制。根据特种漆包线的性能要求和关键技术,对其漆膜绝缘材料的选择、产品结构的设计与优化及研制的生产工艺技术进行探讨,研制出的特种漆包线通过对其性能考核,完全满足客户的各项性能指标要求。     

The relation between BPM culture,BPM methods,and process performance: Evidence from quantitative field studies

Business process management (BPM) research conceptualizes BPM culture as a type of organizational culture that supports BPM. No quantitative fieldwork has so far examined how such a supporting role manifests itself. We study the relationship between BPM culture, BPM methods, and process performance empirically. Our analysis of multiple survey data sets from a total of 581 practitioners of multiple industries suggests that BPM methods indirectly contribute to process performance by establishing a BPM culture. This finding updates the prevalent assumption that the correct application of methods yields direct performance benefits. We discuss several implications for theory and practice.     

湿法磷酸净化脱砷的研究现状

随着食品、医药及电子行业的不断发展，磷酸及磷酸盐的市场需求量不断增大，并且对磷酸的品质要求也越来越高，尤其是对湿法磷酸中砷杂质的要求，湿法磷酸中砷的含量将直接影响其在磷精细化工领域的应用，因此湿法磷酸中砷的高效、安全去除是亟待解决的一大难题。本文主要对湿法净化磷酸脱砷技术的研究情况进行综述，比较了几种湿法净化磷酸脱砷工艺的优缺点，介绍了较常见的化学沉淀法、结晶法，以及新兴的电沉积法、垂直区域熔融法和微反应器脱砷工艺的应用前景，并指出这些新兴的脱砷工艺将成为今后湿法磷酸的净化脱砷的发展方向，如能解决将这些脱砷工艺在实际中的问题，将会对磷酸工业的发展提供一个更有力的支持。